Table of Contents
Advertisement
WI-GTWY-9-xxx Wireless Gateway
• Data [ 1 ...n ]
Data that should be written.
• Fault Information
If 'Invalid Other 'is returned in the Message Information word in the header of the response,
information about the fault can be found here.
0001h:
Address out of range
000Ah:
Failed to execute MSAC1_Alarm_Ack request
000Bh:
Remote station failure
0010h:
Remote Station DPV1 Failure (see 'Error Decode' below).
0011h:
Too much data is sent to the slave (more than Max_Channel_Data_Len)
00FFh:
Module not initialized
• Error Decode, Error Code 1 & Error Code 2
If 'Fault Information' contains error code 0010h, more information according to the DPV1
specification can be found here.
114
V1.18
Hide quick links:
Advertisement
Table of Contents
