Weidmuller WI-GTWY-9 User Manual page 117

WI-GTWY-9-xxx Wireless Gateway
Alarm Confirmation
FB_ABM_MSAL1_ALARM_CON: Command Number = 0023h
This message indicates that a slave has confirmed a previous MSAC1_Alarm_Ack, see "Alarm
Indication (MSAL1_ALARM_IND)" above. This message is sent spontaneously by the WI-
GTWY-9-xxx, i.e. the module itself initiates the message instruction in the "Spontaneous
Message OUT Area" (see "Message Interface Addressing" above).
Note: This message must not be responded to!
Message layout:
Message ID
Message Information
Command Number
Data Size
Extended Word 1
Extended Word 2
Extended Word 3
Extended Word 4
Extended Word 5
Extended Word 6
Extended Word 7
Extended Word 8
• Slave Address
Station address of the slave that indicates the alarm
• Slot Number
Used by the slave to indicate the source of the alarm
Range 0 -254
• Seq Number
Unique identification number of the alarm
Range 0 –31
Command
(ID)
4002h
0023h
0000h
Slave Add Slot No
Alarm Spec
Seq Number
Ack
Alarm Type Ext Diag
-
- Error Decode
Err Code1 Err Code2
Return Code
Fault Information
Response
(no response)
V1.18
117