Panasonic KX-TA308 Installation Manual page 115

3 Features
*1: An OGM is sent to the caller.
When the system detects a cyclic tone or CPC signal while the OGM is being sent, the call is
disconnected.
*2: Music on hold is selected in program [111] as follows.
• External – Uses an external music source, such as a radio.
• Internal – Uses the internal music source equipped with the system.
• Tone –
*3: When an extension in the UCD group is available.
*4: The system holds the call until the assigned time in program [521] expires.
*5: OGM repeats the assigned time intervals in program [522] within the assigned time in program
[521].
*6: The system treats the call according to program [523] as follows when the assigned time in
[521] expires.
• Disconnect – the call is disconnected.
• Intercept –
*7: The other OGM (OGM2) is selected in program [502].
*8: The system treats the call according to program [524] as follows when the assigned time in
[525] expires.
• Disconnect – the call is disconnected.
• Intercept –
*9: If the caller did not hear an OGM, the call will not be disconnected until the caller goes on-
hook.
*10: The UCD Ring Timer after Intercept starts. The destination telephone(s) will ring for the time
programmed in program [526]. If the call is not answered during the programmed time, the
call will be disconnected.
Uses the cyclic tone equipped with the system.
the call is sent to the extensions programmed in [408]-[410].
the call is sent to the extensions programmed in [408]-[410].
U
3-65
Features