Panasonic KX-TA308 Installation Manual page 66

D
• The duration of outside-to-outside (CO-to-CO) line calls can be limited in program [205].
When the specified time expires, both lines are disconnected. A warning tone is sent to
both parties 15 seconds before the time-limit.
• To detect the end of an outside-to-outside (CO-to-CO) line call, CPC Signal Detection
can be assigned. Programs [420] and [421] are required.
• Connection Reference
2.15 OGM/FAX Detection Card Installation
• Required System Programming
To enable the DISA feature
[414]–[416] Outside (CO) Line Mode — Day/Night/Lunch
[420] Calling Party Control (CPC) Signal
[421] CPC Detection for Outgoing Calls
[500] DISA Incoming Dialing Mode Selection
[501] DISA Built-in Auto Attendant
[502] OGM Mode Selection
[503] FAX Connection
[506] DISA Busy Mode
[510] DISA No Dial Mode
[511] DISA Security Type
[512] DISA Security Codes
[513] Cyclic Tone Detection
[514] FAX Tone Detection
[516] DISA Incoming Assignment
[518] DISA Tone Selection after the Security Code
To set DISA timer values
[205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit
[504] DISA Delayed Answer Time
[505] DISA Waiting Time after OGM
[517] DISA AA Wait Time
[519] DISA OGM Mute Time
To enable the Intercept Routing feature
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch
[507] DISA Intercept Mode
[508] DISA Ringing Time before Intercept
[509] DISA Ringing Time after Intercept
[515] Intercept Time for Internal DISA
• Related Feature References
Intercept Routing, Outgoing Message (OGM), Polarity Reverse Detection,
Station Hunting
3-16
Features
3 Features