Hookswitch Flash Timing Range Selection - Panasonic KX-TA308 Installation Manual

[207]-[208]

[207] Hookswitch Flash Timing Range Selection

Sets the hookswitch flash time range sent from an extension to the system.
MODE 1: 40 to 140 milliseconds.
MODE 2: 80 to 180 milliseconds.
MODE 3: 80 to 650 milliseconds.
MODE 4: 80 to 1000 milliseconds.
MODE 5: 200 to 1000 milliseconds.
2
Default
• Feature Reference
Section 3, Features
Hookswitch Flash
[208] Interdigit Time
Assigns the maximum time allowed between digits for an outgoing outside call.
2
Default
• The interdigit timer applies until the toll restriction check is completed. When the timer
!
!
expires, an outgoing outside call will be disconnected while dialing, if "Enable" was
selected in program [211] "No Dial Disconnection".
• For a single line telephone, an outgoing outside call will be released from a DTMF
receiver when the interdigit timer expires.
• Feature Reference
Section 3, Features
Toll Restriction
4-30
System Programming
0
7
NEXT
MODE 1
0 8
NEXT
10 seconds
4.2
STORE
SELECT
(MODE1/MODE2/
MODE3/MODE4/
MODE5)
STORE
SELECT
(5/10/15/20 sec)
System Programming
END
END