Panasonic KX-TA308 Installation Manual page 90

O
Case 4: Uses a different OGM when the line is busy – OGM for DISA.
Outside Call
Case 5: Distributes calls to the UCD group – OGM for UCD.
Outside Call
Outside Call
Case 6: Disconnects a call after the OGM – OGM for UCD.
Outside Call
3-40
Features
OGM1: "This is A company. For the sales division, press 1. For the service
division, press 2. To call the operator, press 0."
OGM2: "This is B company. To contact Mr. A, press 101. To contact Mr. B, press
102."
Required Settings: [502] "MODE2"
[414]-[416] "DISA1" for the A company outside (CO) line(s).
OGM1
The line is busy.
OGM2
OGM1: "This is A company. For the sales division, press 1. For the service
division, press 2. To call the operator, press 0."
OGM2: "We are sorry. The line is currently busy. If you want to call the operator,
press 0."
Required Settings: [502] "MODE2"
[414]-[416] "DISA1"
[506] "DISA2"
The line is busy.
OGM1
The line is busy.
OGM2
OGM1: "We are sorry. The line is currently busy. Please hold."
OGM2: Same as OGM1
Required Settings: [502] "MODE3"
[414]-[416] "UCD"
OGM1
The line is busy.
OGM2
OGM1: "We are sorry. The line is currently busy. Please hold."
OGM2: "We are sorry. The line is currently busy. Please call back later."
Required Settings: [502] "MODE4"
[414]-[416] "UCD"
"DISA2" for the B company outside (CO) line(s).
System
DISA with
OGM
DISA with
OGM
(If the operator is selected.)
System
UCD with
OGM
(When the line is free.)
UCD with
OGM
(When the line is free.)
System
UCD with
OGM
3 Features
To the designated destination
To the Operator
To the UCD group
The call is disconnected.