Panasonic KX-TA308 Installation Manual page 70

D
*1: The DISA Delayed timer starts. This is the time between a call reaching the system and being
received. The time is assigned in program [504].
*2: When the assigned time period in program [519] expires, the system sends a short beep to the
caller.
*3: The Intercept Timer for Internal DISA starts. This is the time the system waits for the number
sent by the caller. If nothing is entered by the caller during this time, the system will regard it
as "Nothing is dialed." The time is assigned in program [515].
*4: The system can accept the following numbers:
• 100 through 199 as an extension number.
• 81 through 86 as an outside (CO) line group line access number.
• 9 as an automatic line access number when "Without AA" is assigned in program [500].
Even if "With AA" is assigned, 9 is regarded as the automatic line access number if nothing
is assigned to "9" in program [501]. In case "9" is assigned as the operator call number in
program [121] "Automatic Outside (CO) Line Access Number Selection", 9 is regarded as
the operator call number instead of an automatic line access number.
• 0 as the operator call number when the operator is assigned in program
[008] "Operator Assignment" and "Without AA" is assigned in program [500]. Even if
"With AA" is assigned, 0 is regarded as the operator call number if nothing is assigned to
"0" in program [501]. If "0" is assigned as an automatic line access number in program
[121], 0 is regarded as an automatic line access number instead of the operator call number.
• 0 through 9 as a built-in auto attendant number when "With AA" is assigned in program
[500]. The DISA AA Wait timer starts after receiving the first 1-digit number. If the timer
expires, the system will assume that the first digit is an AA number. The time is assigned in
program [517].
*5: A security code is necessary when program [511] is assigned as follows.
• All Security –
• Trunk Security – the caller can access an outside (CO) line if the security code matches a
If the entered number is the same as one of the security codes, a short beep will be heard.
The short beep can be disabled by program [518]. If the number is wrong,
3 beeps will be heard. The call will be disconnected after 3 failed attempts.
*6: The caller must enter the desired telephone number after hearing a dial tone from the Central
Office.
*7: The DISA Ring Timer Before Intercept starts. The destination telephone(s) will ring for the
time programmed in [508].
*8: The system treats the call according to program [507] as follows.
• Disconnect – the call is disconnected.
• Intercept –
If the call is still not answered within the time programmed in [509], it will be disconnected.
3-20
Features
the system waits for a security code dialed after " ". When the security
code matches a code programmed in [512], the system accepts the
numbers after the code.
code programmed in [512]. The caller can access other destinations
without the security code.
the call is sent to the extensions programmed in [408]-[410] "Flexible
Ringing Assignment – Day/Night/Lunch".
3 Features