Panasonic KX-TA308 Installation Manual page 122

4.1 Before System Programming
NOTE:
System data clear should be performed before System Programming.
( 2.22, Starting the System for the First Time)
Default Setting
This system has factory default settings (
needs to be changed, you can change the setting by System Programming. Default shows
you the factory default setting. Any required changes can be written in the Programming
Tables listed in section 7, Programming Tables.
Required Telephone Set
The following display telephone is required for System Programming.
• KX-T7330
Connect the telephone to the following.
• Jack number 01
Before entering the programming mode
Before entering the programming mode, confirm that:
• Your telephone is on-hook.
• No calls are on hold at your telephone.
Placing the Overlay on a Telephone
A programming overlay is packed with the telephone at the factory. This overlay should be
used at all times during programming. The functions of the telephone keys change during
programming as shown below.
Location of Controls with the Overlay
4-2
System Programming
5.1, Default Values). If any of the programming
SECRET SELECT STORE
PROGRAM PAUSE FLASH
ABC
2
1
GHI
JKL
4 5
PQRS TUV
8
7
0
PREV END
KX-T7330
|,
CLEAR
DEF
3
MNO
6
WXYZ
9
NEXT