External Pager (Paging Equipment) Connection; Paging - Panasonic KX-TA308 Installation Manual

2.9

External Pager (Paging Equipment) Connection

One external pager (user-supplied) can be connected to the system as illustrated below.
Use an EIAJ RC-6701 A plug (2-conductor, ø 3.5 mm in diameter).
• Output impedance: 600 Ω
Maximum length of the cable
AWG 18 – 22: Under 10 m (33 feet)
!
!
• To adjust the sound level of the pager, use the volume control on the amplifier.
• Paging jack is a SELV port and should only connect approved SELV device or connect
via a Line Isolation Unit with a Telecommunications Compliance Label.
• Required System Programming
Section 4.2, System Programming
[106] External Paging Access Tone
• Feature Reference
Section 3, Features

Paging

2-10
Installation
Paging Jack
PAGING
E R
P O W
Amplifier
Paging Equipment
Speaker