Calling Party Control (Cpc) Signal Detection; Call Park - Panasonic KX-TA308 Installation Manual

C

Calling Party Control (CPC) Signal Detection

The Calling Party Control (CPC) signal is a disconnect signal sent from the Central Office
for an outside call. The CPC signal detection is activated by programs [420] and [421].
Program [420] is for incoming outside calls, and [421] is for outgoing outside calls.
• Required System Programming
[420] Calling Party Control (CPC) Signal
[421] CPC Detection for Outgoing Calls

Call Park

Allows an extension user to place a held call into a system parking area. Any extension user
can retrieve the parked call to perform other operations. Up to 10 calls can be parked at the
same time.
• If a parked call is not retrieved within the assigned time in program [200], a ring tone or
!
!
an alarm tone will be heard.
• If a parked call is not retrieved within 30 minutes, it will be automatically disconnected.
• This feature is useful when an extension user wants to hold more than one intercom call
with a proprietary telephone, or more than one intercom call or outside call with a single
line telephone.
• During a 5-party conference, this feature cannot be performed.
• Required System Programming
[200] Hold Recall Time
• Related Feature Reference
Conference (5-party)
• Operating Instructions Reference
1.5 During Conversation, "Placing
3-8
Features
a Call in System Parking Area
(Call Park)"
3 Features
Parking zone