Installing The Side Cover; Figure 2-16 Side Cover Detail - HP Integrity rx8640 Installation Manual

Installing the System
Installing the Top and Side Covers
Step 2. Loosen the blue retaining screw securing the cover to the chassis (Figure 2-16).
Figure 2-16 Side Cover Detail
Retaining Screw
Step 3. Slide the cover from the chassis toward the rear of the system.
Step 4. Place the cover in a safe location.

Installing the Side Cover

The following section describes the procedure for installing the side cover.
Step 1. Orient the cover according to its position on the chassis.
Step 2. Slide the cover into position using a slow, firm pressure to properly seat the cover.
Step 3. Tighten the blue retaining screw securing the cover to the chassis.
58
Chapter 2