Removing And Replacing The Processor Airflow Guide; Figure 2-27 Removing The Memory Airflow Guide - HP 9000 rp3440 Installation Manual

Installing and Configuring
Removing and Replacing Airflow Guides
Step 3. Grasp the memory airflow guide and lift it out of the system (Figure 2-27).

Figure 2-27 Removing the Memory Airflow Guide

Replacing the Memory Airflow Guide
Step 1. Align the guides on both sides of the airflow guide with the slots on the chassis.
Step 2. Insert the memory airflow guide in the slots.
Step 3. Replace the cover. (See "Removing and Replacing the Metal Cover" on page 26.)

Removing and Replacing the Processor Airflow Guide

Removing the Processor Airflow Guide
Step 1. Turn off the system, disconnect power and external cables.
Step 2. Remove the system cover. (See "Removing and Replacing the Metal Cover" on page 26.)
Step 3. Remove the IDE cable and power module cables from the processor airflow guide cable clips.
Step 4. Remove the main portion of the airflow guide:
a. Hold the guide using the opening on top of the guide.
42
Chapter 2