6-4] Second Dial Tone - Panasonic KX-TAW848 Programming Manual

Maintenance Console Location
2.12.3 [6-3] Verification Code
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings
Feature Manual References
1.3.16 COS (Class of Service)
1.19.1 Verification Code Entry
Itemized Billing Code for ARS
Specifies the itemized billing code used by the ARS feature for identifying calls made with a
verification code for accounting and billing purposes.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.12.3 [6-3] Verification Code
Programming Manual References
2.14.6 [8-5] Carrier
Feature Manual References
1.1.3 ARS (Automatic Route Selection)

2.12.4 [6-4] Second Dial Tone

A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting
code and the following digits. When a programmed Second Dial Tone Waiting code is dialed after
seizing a CO line, a preprogrammed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed. 20 codes are displayed at
a time. To display other sets of codes, click the applicable tab.
Second Dial Tone Waiting Code
Specifies the Second Dial Tone Waiting code.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
2.12 [6] Feature
PC Programming Manual 399