3-6] Extension Hunting Group - Panasonic KX-TAW848 Programming Manual

2.9 [3] Group
Value Range
Max. 20 characters
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.21 [3-9] PS Ring Group—Group Name
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Name
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Extension Name
Feature Manual References
1.9.1 ICD GROUP FEATURES
Delayed Ring
Specifies the delayed ringing setting of each member. (Applicable when the call distribution method
of the incoming call distribution group is set to Ring.)
Default
Immediate
Value Range
Immediate, 1–6 Rings, No Ring
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—Distribution Method
Feature Manual References
1.9.2 ICD Group Features—Group Call Distribution

2.9.13 [3-6] Extension Hunting Group

If an extension within an idle extension hunting group is called when it is busy or in DND mode, the
call can be redirected to another extension in the same hunting group, according to a preprogrammed
hunting type. If there is no idle extension in the group, the call can then be redirected to the overflow
destination, which can be different depending on the time mode (day/lunch/break/night). A maximum
of 64 hunting groups can be programmed, each containing up to 16 extensions.
To assign members to the group, click Member List. To assign extensions as overflow destinations
easily, click Destination Setting (see 2.1.6 Extension Number Setting).
Hunting Group Name
Specifies the name of the hunting group.
228 PC Programming Manual