Panasonic KX-TAW848 Programming Manual page 290

2.10 [4] Extension
Incoming Call Wait Timer for Extension Caller ID
Specifies the length of time that the ringing for a call is delayed when the call follows immediately after
the previous unanswered call. When receiving two calls in quick succession (e.g., when a call waiting
in a queue is directed to an extension immediately after the previous unanswered call stops ringing),
some SLTs require a pause, after the first call stops ringing, to receive the second call's Caller ID
information.
Note that the setting of this parameter is only effective when a resource for sending extension Caller
ID is assigned in Extension Caller ID Resource-1, 2 for the port in 2.8.18 [2-10] Extension CID
Settings.
Default
0
Value Range
0–15 s
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.18 [2-10] Extension CID Settings—Extension Caller ID Resource-1, 2
Feature Manual References
1.3.1 Caller ID
Wrap-up Timer
Specifies the length of time that must pass after completing a call before an extension will accept
another call when logged in as a member of an Incoming Call Distribution Group.
Default
0 s
Value Range
0–3000 s
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
290 PC Programming Manual