8-6] Leading Number Exception; 8-7] Authorization Code For Trg - Panasonic KX-TAW848 Programming Manual

2.14 [8] ARS
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
1.17.2 Tenant Service

2.14.7 [8-6] Leading Number Exception

Specifies telephone numbers that will not be connected using the ARS feature. When the user-dialed
number includes a leading number exception, the PBX sends the number to a CO line by the Idle Line
Access method if ARS Mode in 2.14.1 [8-1] System Settings is "on".
A maximum of 200 different leading number exceptions can be programmed. 40 leading number
exception entries are displayed on the screen at a time. To display other sets, click the applicable tab.
Leading Number Exception
Specifies the leading number exception.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, #, and X)
Maintenance Console Location
2.14.7 [8-6] Leading Number Exception
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)

2.14.8 [8-7] Authorization Code for TRG

An Authorization code can be specified for each trunk group. The Authorization codes entered here
can be added to user-dialed numbers by adding "G" to the Modify Command specified on the
Carrier tab of screen 2.14.6 [8-5] Carrier.
8 trunk groups are displayed on the screen at a time. To display other groups, click the applicable tab.
Authorization Code for Trunk Group—TRG 01–TRG 64
Specifies the Authorization code of each carrier for each trunk group.
Default
Not stored.
420 PC Programming Manual