Panasonic KX-TAW848 Programming Manual page 35

Note
When a profile is edited and saved with a new name, the original profile is not deleted.
The settings are as follows:
Setting
Profile Name
System Password
Default
The functions of the buttons on this screen are as follows:
Button
Save
Cancel
To create or edit a profile
1.
From the Connect menu, select Profile Setup.
The Profile Setup window (2.3.4 Connect—Profile Setup) will be displayed.
2.
Click New or Edit.
The Profile Editor window will be displayed.
3.
Enter a name for this profile.
4.
Enter the system password used to connect to the PBX.
5.
Select the default connection method.
6.
Enter the detailed connection method settings as required. See the tables below for more
information.
Note that it is possible to select connection methods other than the default method when using
this profile to connect to the PBX. For this reason, you can choose to input settings for multiple
connection methods in a single profile. Click the tabs to view the settings for each type of
connection.
7.
Click Save.
Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Description
Enter a name used to identify this set of PBX connection settings. This
name must not be the same as another profile name.
Enter the password to log on to the target PBX, if required.
Select the default connection method.
Function
Saves the current profile information.
Closes the current screen without saving the profile information.
Values
COMx
2400bps, 4800bps,
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
Explanation
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports are displayed.
Specify the speed of data transmission.
PC Programming Manual
2.3 Connect
35