Panasonic KX-TAW848 Programming Manual page 190

2.8 [2] System
Value Range
Disable: No port
Slot 01:HLC4: Initially installed 4 Hybrid ports
Slot nn:SLC8 1-4: Ports 1 to 4 of the SLC8 card (nn=slot number)
Slot nn:SLC8 5-8: Ports 5 to 8 of the SLC8 card (nn=slot number)
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 8—Extension Caller ID
Feature Manual References
1.3.1 Caller ID
Extension Caller ID Modulation Type
Specifies the modulation frequency to be used when sending Caller ID information to an SLT.
Default
Bell202(Bellcore)
Value Range
V.23(ETSI), Bell202(Bellcore)
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Channel Seizure Signal bits
Specifies the number of seizure bits to send when sending Caller ID information to an SLT.
Default
300 bits
Value Range
10 × n (n=3–40) bits
Maintenance Console Location
2.8.18 [2-10] Extension CID Settings
190 PC Programming Manual