Table of Contents
Advertisement
Remote Control Unit
The Remote Control Unit is used to
Disarm the system.
Arm
Delay-Arm
Disarm
The Remote will activate the Instant- rm, Delay- rm
or Disarm functions.
The Remote Control also incorporates a Personal
ttack Switch (P S).
immediately initiate a Full
the system is rmed or Disarmed, (unless the system
is in Service, Test or Program mode).
ny number of Remote Controls can be used with
your system, providing they are all coded with the
same system House Code.
The Remote Control is powered by a CR2032 type
Lithium Cell battery which under normal conditions will
have a typical life in excess of 1 year. Under normal
battery conditions the LED on the Remote Control will
only illuminate when a button is pressed. However,
under low battery conditions the LED will flash every
time the button is pressed. When this occurs the
battery should be replaced as soon as possible.
rm and
Transmit LED
Slide up
to operate
Personal Attack
ctivating the P S will
larm condition whether
Setting the Remote Control
1. Remove the front cover by undoing the small
screw on the rear of the Remote Control.
House Code
Dip Switches
Jumper Link
Battery Clip
Battery
2. Located above the battery is a row of 8 DIP
switches. Select and record a random combination
of 'ON' and 'OFF' positions for the DIP switches.
This will be the system House Code and must be
set to the same ON/OFF combination as the House
Code DIP switches in all other System Devices.
Important: The House Code for your system should
be changed from the factory default setting.
3. To utilise the panic facility on the Remote Control,
remove the Jumper Link. If 'panic' is not required
leave the Jumper Link in place.
4. Remove the battery from its packaging and insert
it under the clip ensuring that the +v terminal faces
upwards away from the PCB.
5. Replace the front cover and fixing screw.
Testing the Remote Control
1. Press the
illuminate while the button is pressed and
extinguish within 1 second of releasing the button.
2. Press the
ensure that the Transmit LED illuminates as
before.
6
button. The Transmit LED should
and
buttons in turn to
Hide quick links:
Advertisement
Table of Contents
