Table of Contents
Advertisement
Once both MF2900 AP and the clients are configured with the same four WEP keys, clients may use any of
the four keys for authentication and/or encryption/decryption—and the key used need not be the same key
as the MF2900 AP. For example, the MF2900 AP may use key 1, whereas the client may use key 1, 2, 3, or 4.
3. Click the Update button to save your settings.
Configuring WPA PSK
WPA PSK configuration menu allows automatic key generation based on a single passphrase. WPA PSK
provides very strong security, but may not be supported on older systems.
If you configure the MF2900 AP with WPA-PSK, the other devices in the network will not connect unless
they, too are set to WPA-PSK, and are configured with the same passphrase.
1. Click the Configuration -> Wireless link in the left-hand navigation pane (
2. Select WPA-PSK in the Security drop-down menu.
3. Click the Edit Security Settings button.The WPA Configuration appears (
Figure 9—WPA Configuration
8000001, December 2005
MediaFlex 2900 Multimedia Access Point User's Guide
Configuring the MF2900 AP
Figure
6).
Figure
9).
33
Advertisement
Table of Contents
