Advertisement
Note: For all rough in connections see Installation and Layout Detail Drawing.
SPECIFICATIONS
CONSTRUCTION -
construction. All internal castings are non-corrosive lead free nickel alloy or bronze.
Two opening operating doors. Operating doors have fingertip control, rotating on S/S bracket. Doors formed of
DOORS -
18 gauge S/S.
Centrifugal type "packless" pump with a brass petcock drain. Construction includes ceramic seal and a balanced
PUMP -
cast impeller on a precision ground stainless steel shaft, extension or sleeve. All working parts mounted as an assembly and
removable as a unit without disturbing pump housing. One 1/2 HP motor, standard horizontal C-face frame, drip proof, internally
cooled with ball-bearing construction.
CONTROLS -
and all dishwasher integral controls. All controls safe low voltage 24 VAC.
SPRAY SYSTEM -
Power wash arm above with 14 high pressure action cleansing slots and 6 power wash arms below, each designed
WASH -
with 5 high pressure action cleansing slots. The slots are precision milled for water control producing a fan spray. Wash arms
are removable without the use of tools.
FINAL RINSE -
6 nozzles.
Overflow assembly with skimmer is removable without use of tools for drain line inspection. Heater protected by low
DRAIN -
water level controls.
Capacity
per hour
43 racks
720 dishes
Final rinse
consumption
at 20 psi min.
34 gals./hr.
0.75 gals./rack
3M 0808
PRINTED IN USA
Information and specifications subject to change without notice
Ensign_40-2_TM2009
®
Hood and tank constructed of 16 gauge 18-8 type 304 S/S. Hood unit of all welded seamless
Side-mounted control cabinet, housing motor controls and overload protection, transformer, contactors
Wash and rinse spray systems made of 18-8 type 304 S/S pipe.
1 spray body above designed with 4 power rinse nozzles and 1 power rinse coil below designed with
Tank capacity
Motor size
8.1 gals.
1/2 hp (wash)
Exhaust hood
Peak rate
drain flow
requirement
N/A
9 gals./min.
PART 1 TECHNICAL INFORMATION
Electric usage
Steam consumption
at 20 psi min.
1.5 kw wash tank
6 lbs./hr tank
6 kw booster 40° rise
22 lbs./hr rem. booster 40° rise
12 kw booster 70° rise
43 lbs./hr rem. booster 70° rise 4.1 gals./min.
Shipping
Current draw
weight
amps
115/1/60 ................... 10.7 .................... 24.0
208/3/60 ..................... 2.9 ...................... 7.1
240/1/60 ..................... 5.6 .....................11.3
240/3/60 ..................... 2.6 ...................... 6.2
380/3/50 ..................... 1.6 ...................... 3.9
400 lbs.
480/3/60 ..................... 1.4 ...................... 3.1
2
www.insingermachine.com
ENSIGN 40-2
Final rinse
peak flow
at 20 psi min.
Steam
Electric
w/o booster
800-344-4802
Advertisement
