Insinger Ensign 40-2 Technical Manual page 12

CLEANING PROCEDURES (continued)
9. Clean the tank level float with a plastic abrasive pad
(do not use steel wool).
10. Final rinse nozzles should be cleaned of matter
clogging the jet spray.
11. The doors should be left open to allow drying of
interior surfaces.
Ensign_40-2_TM2009
®
PART 3 OPERATION & CLEANING INSTRUCTIONS
10

NOTE:
Improper cleaning of the suction strainers
will cause the pumps to cavitate. This will
cause poor washing results.
CAUTION:
Level floats must be cleaned daily.
Build-up of grease and dirt will cause faulty operation
of the tank fill heating system.
www.insingermachine.com 800-344-4802