5
Relay Dest.
Select the device to perform the transmission relay, and then touch [OK].
!
Detail
Relay stations must be registered in advance. For details, refer to the User manual – Network
Administrator.
If settings have been specified for "SMTP Authentication User Name" and "SMTP Authentication
Password" on the relay station, the SMTP authentication user name and SMTP authentication
password must be specified on the machine sending the fax when the relay station is registered. For
details, refer to the User manual – Network Administrator.
For details on specifying the relay station given priority, refer to "Default Settings - Fax/Scan - IP Relay
Dest. Selection" on page 9-8.
5.3.9
Dial - E-Mail
From the control panel, type in the e-mail address.
-
Domain: If frequently entered domain names have been registered, the e-mail address can easily be
entered.
-
Add: Touch this button to specify an additional destination.
Note
If the optional fax kit has not been installed, [Address] appears instead of [Dial].
5-24
Transmitting data
bizhub C200