One-Touch/Box Reg. - One-Touch; Flow For Registering One-Touch Destinations - Konica Minolta bizhub C200 Operation Manual

9
9.4

One-Touch/Box Reg. - One-Touch

The procedures for registering one-touch destinations and specifying their settings are described below.
!
Detail
With software switch settings, the machine can be set so that only the administrator can register
destinations and so that registered information is not displayed in screens and reports. For details, refer
to the User manual – Network Administrator.
9.4.1

Flow for registering one-touch destinations

A maximum of 300 one-touch dial buttons can be programmed. The general procedure for registering one-
touch destinations is shown below. For details on specifying settings, for example, for the communication
modes, refer to the descriptions starting with page 9-17.
1
Press the [Utility/Counter] key in the control panel.
2
Touch [One-Touch/Box Reg.].
3
Touch [One-Touch].
4
Touch the one-touch dial button to be programmed.
– To select a different index, touch
9-14
User Settings / User Management / One-Touch/Box Reg.
or , or select a different index in the Index List screen.
bizhub C200