One-Touch Copy; Changing/Deleting One-Touch Destinations - Konica Minolta bizhub C200 Operation Manual

User Settings / User Management / One-Touch/Box Reg.
9.4.3

One-Touch Copy

The settings for a previously registered one-touch dial button can be copied and saved with a different one-
touch dial button. The settings of a one-touch dial button can be specified after the one-touch destination is
registered.
1
From the One-Touch/Box Reg. screen, display the one-touch dial button that is to be copied.
2
Go to page 3/3, and then touch [One-Touch Copy].
3
From the list of one-touch dial buttons, touch the button where the one-touch dial settings are to be
copied to. Check the settings, and then touch [OK].
Note
The settings cannot be registered with a one-touch dial button that has already been registered.
9.4.4

Changing/deleting one-touch destinations

Follow the procedure described below to change or delete registered one-touch destinations.
1
Press the [Utility/Counter] key in the control panel.
2
Touch [One-Touch/Box Reg.].
3
Touch [One-Touch].
4
Touch the button for the one-touch destination to be changed or deleted.
– To select a different index, touch
5
Check the information to be registered, and then change the settings as desired.
– To delete the one-touch destination, touch [Delete].
bizhub C200
or ,or select a different index in the Index List screen.
9
9-17