Printing Received Faxes; Printing With No Reduction Specified; Original Loading Orientation; Transmission Methods - Konica Minolta bizhub C200 Operation Manual

6
6.5

Printing received faxes

When printing the received fax, the page size of the received document is compared with the size of the
loaded paper, and the fax is printed reduced by the specified zoom ratio or it is printed reduced to fit in the
paper. In addition, if the machine is set to print at a specific zoom ratio, it is printed at that zoom ratio,
regardless of the paper size of the received document.
6.5.1

Printing with no reduction specified

If the machine is set not to reduce the fax, it can be sent in any of the ways shown below.

Original loading orientation

Transmission methods

As an example, the following shows the case where this machine sends a B4-size original with no reduction
specified and the recipient's devices receives it at an A4 size.
The document may be printed at a reduced size after it is received, depending on the recipient's fax machine.
If this machine is communicating with a machine of the same model, the factory default settings are specified
to reduce the received document.
6-8
Original
B4
Length of the
short edge
Receiving data (G3/IP/I-FAX)
Transmitting image from
this machine
A4
Length of the
short edge
bizhub C200