Fax - Quick Scan Tx (G3); Fax - Password Tx (G3) - Konica Minolta bizhub C200 Operation Manual

5
5.5.9

Fax - Quick Scan TX (G3)

This function begins sending the fax at the same time that the first page is scanned. Use this function for
faxing originals containing a large number of pages without filling the memory. If the line is busy, transmission
begins as soon as the line is available.
- Load the original into the ADF.
- This function cannot be specified if multiple recipients are selected.
- The "2in1", "2-Sided TX", "Timer TX" and "Priority TX" functions cannot also be specified.
Note
This function does not appear if the optional fax kit has not been installed.
5.5.10

Fax - Password TX (G3)

This function sends a transmission with a password applied. If the recipient's fax machine is set for closed
network receptions, the sender's fax machine must transmit with the same password as the closed network
reception password.
- This function can be used only if the recipient's machine is compatible with closed network (password)
receptions.
!
Detail
In order to specify the "Password TX" function, the password must first be specified in Administrator
mode. For details, refer to "Fax Settings - Password Communication (G3)" on page 10-21.
This function does not appear if the optional fax kit has not been installed.
5-36
Transmitting data
bizhub C200