Transmitting data
5.5.18
Application - Polling RX (G3)
A document loaded in the sender's machine or the document reserved for polling transmission can be sent
with a command from the recipient. This is convenient when the recipient is to incur the cost of the call.
Note
This function does not appear if the optional fax kit has not been installed.
1
Select the method for specifying the sender, and then specify the sender.
2
Specify the time that the fax is to be received, and then press the [Start] key.
–
When specifying with one-touch dial buttons, the F-code must be registered in advance.
bizhub C200
5
5-43