Checking The Recipient Before Sending; Overseas - Konica Minolta bizhub C200 Operation Manual

5

Checking the recipient before sending

The machine can be set to send the fax transmission after checking the CSI (called subscriber ID) signal
received from the recipient's machine in order to prevent misdirected fax transmissions.
- The recipient's machine ID must be registered in order for the CSI signal to be checked.
- The telephone number and special character can be programmed with one-touch dial buttons, and a
checked receiver transmission can be performed by using a one-touch dial button.
- Before an original is sent, the CSI signal received from the recipient's machine is compared with the
recipient's telephone number, and the original is sent only if the CSI signal matches the recipient's
telephone number.
CSI (called subscriber ID) signal: Machine telephone number information = International telephone
number (including "+", telephone number country code, area code and subscriber number)
- A transmission error occurs if the CSI signal is different from the recipient's telephone number or the
CSI signal cannot be received.
- By adding a comparison number after the special character, the original can be sent only if the
comparison number matches the CSI signal.
Dialing Method
Recipient's telephone number + special character "S"
Recipient's telephone number + special character "S"
+ comparison number
!
Detail
With software switch settings, the machine can be set to perform checked receiver transmissions with
each transmission even if the special character "S" is not added. For details, refer to the User manual –
Network Administrator.
With software switch settings, the number of digits that are compared in the CSI signal and the
recipient's telephone number can be specified. As a factory default, the machine is set to "4 digits". For
details, refer to the User manual – Network Administrator.

Overseas

When faxing to a location where transmission conditions are poor, a slower transmission speed can be set
to ensure that the fax can be sent.
!
Detail
This function cannot be used together with the following functions.
Polling TX
Polling RX
Bulletin
5-20
Method for checking the recipient's machine
The CSI signal and recipient's telephone number are com-
pared.
The CSI signal and comparison number are compared.
Transmitting data
bizhub C200