General Configuration Attributes - OneAccess Crocus CNV User And Reference Manual

Configuration attributes

6.2 General configuration attributes

crocusIfConv<2m/Nx64><Tt/Cv>/sysName
This is a field where you can assign a name to the Crocus CNV. The field has a limit of 64 characters.
This is a SNMP MIB2 parameter.
crocusIfConv<2m/Nx64><Tt/Cv>/sysContact
This is a field where you can fill in the name of a contact person together with information on how to
contact this person. The field has a limit of 64 characters.
This is a SNMP MIB2 parameter.
crocusIfConv<2m/Nx64><Tt/Cv>/sysLocation
This is a field where you can fill in the physical location of the Crocus CNV. The field has a limit of 64
characters.
This is a SNMP MIB2 parameter.
crocusIfConv<2m/Nx64><Tt/Cv>/bootFromFlash
The Crocus CNV has two flash memory banks. Each flash memory can contain a complete software
version, but only one can be active. You can choose from the following settings:
Value If you boot the Crocus CNV then ...
flash1
the first flash memory bank is activated.
flash2 the second flash memory bank is activated.
auto the Crocus CNV automatically chooses the flash memory bank containing the most
recent firmware, by comparing the firmware version numbers.
For a Crocus CNV CV, the bootFromFlash attribute only works on converter A. Although the bootFromFlash
attribute is also visible in the containment tree of converter B, its setting is ignored. Both converter A and
B use the same firmware.
78
Crocus CNV
default: <empty>
default: <empty>
default: <empty>
default: auto
Reference manual