OneAccess Crocus CNV User And Reference Manual page 131

Crocus CNV
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/usedProcPower
This table lists the used processing power for the 11 most recent 30 seconds intervals. The processing
power is expressed as a percentage of the total processing power. Each entry in the attribute
usedProcPower is composed of the following attributes:
Value
sysUpTime Displays the elapsed time since the last cold boot. The next values are for the 30
seconds period before this relative time stamp.
minimumPP (%) This is the minimum percentage of processing power in use during the last 30
seconds.
averagePP (%) This is the average percentage of processing power in use during the last 30
seconds.
maximumPP (%) This is the maximum percentage of processing power in use during the last 30
seconds.
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/taskInfo
This attribute contains status information concerning the different tasks running on the processor. It is a
table grouping up to 31 task slots, which is the maximum number of parallel tasks running on the
processor's operating system.
This attribute contains the same information as taskInfo in the status group (refer to Section
Operating system status
Reference manual
attributes).
Description
Performance attributes
7.6 -
121