Table of Contents
Advertisement
VBOX II User Guide
Firmware Upgrades
Firmware refers to the operating software inside the VBOX II. The firmware is responsible for all of the functions within the VBOX and from time to time,
firmware updates will be released by Racelogic to improve or enhance the way that the VBOX works. The latest firmware will always be available on the
Racelogic web site in the downloads directory:-
http://www.racelogic.co.uk/2003/vbox/downloads.htm
It is recommended to check the web site periodically for updates. The VBOX II upgrade files have a ".ruf" file extension. To upgrade the VBOX II firmware,
download the latest firmware file from the Racelogic web site and copy this file onto your PC. If you have done a full VBOX CD installation then you will have
the upgrade programme automatically installed in the Utilities folder of VBOX folder. If not then this can also downloaded from the website.
Connect you pc to the VBOX via the VBOX serial lead and apply power to the VBOX.
Either 'double click' on the .ruf upgrade file, which auto runs the upgrader software, or run the upgrader software and load in the .ruf firmware upgrade file.
Then follow the onscreen instructions and the VBOX firmware will be upgraded. At the end of the process power down the VBOX when prompted, before
further use
During the upgrade process an upgrade log file will have been created. This log file can be emailed to the support address below should any problems arise.
If you have any questions regarding upgrade of VBOX, please do not hesitate to contact
support@racelogic.co.uk
Page 16 of 23
Advertisement
Table of Contents
