Magnified Status Indications On The Lcd Monitor - JVC GY-HD200U Instructions Manual

No. Item
8 Time/Date indication
9 Voltage indication
0 Audio Lock indication
Magnified Status Indications on the
LCD Monitor
The characters on the status screens can be showed alone
in magnified size on the LCD monitor.
1.
Set the LCD+VF item on the LCD/VF[4/4] menu screen to ON. X See page 89.
2.
When the DISPLAY button is briefly pressed while the LCD monitor is displayed, the displayed contents change every time the
DISPLAY button is pressed.
Only image displayed
Image and characters displayed
No. Item
1 Audio Lock Indicator
2 Time Code Generator Setting
Indicator
3 Drop/Non-drop Indicator
4 Indication of DR-HD100 Oper-
ation
MEMO
When characters indicating the status are displayed in
magnified size on the LCD monitor, the viewfinder display
the image.
Recorded data are displayed during playback, fast forward, and rewind.
During recording in DV format, the data from the IEEE1394 connector is displayed.
During recording in HDV format, the data of internal clock is displayed.
(HDV/DV signal input is possible with the GY-HD200U, GY-HD201E.)
Whether or not the date and time should be displayed and the display style are set on the TIME/DATE
menu screen. X See page 92.
When the date and time have not been set, the following indication appears.
- -/- -/- - - -: - -: - -
(Example) 12.2V : Indicates remaining battery level in 0.1V steps.
Battery voltage and remaining battery are displayed. Select the display method in BATTERY INFO. on the
LCD/VF[1/2] menu screen X See page 88.
Anton Bauer battery: Voltage/remaining capacity (%)/remaining time
IDX Endura battery : Voltage/remaining capacity (%)
Displayed when the audio signal from DV recording or playback is locked to the video signal.
DISPLAY button
Characters shown enlarged
Displayed during recording and playback when the audio signal is locked to the video signal.
Indicates the set status of the TC GENE switch on the side section.
FREE : TC GENE switch is set to PRESET-FREE RUN MODE.
RECR : TC GENE switch is set to PRESET-REC RUN MODE.
REGN : TC GENE switch is set to REGEN MODE.
DUPL : There is 1394 input in VTR mode and TC DUPLI. menu is set to ON.
Indicates the framing mode of the time code.
DF : Drop frame mode
NDF : Non-drop frame mode
When a DR-HD100 (HDD unit by FOCUS enhancements) is connected, its operation status is displayed.
(For details, refer to the DR-HD100 INSTRUCTION MANUAL.)
Contents
1
2
3
Contents
266S DD 4
29