Outputting Audio - JVC GY-HD200U Instructions Manual

PLAYBACK MODE

Outputting Audio

Setting
Confirm that this device is in the VTR mode.
(VTR indicator: On)
MONITOR
VTR indicator
SELECT switch
VF BRIGHT
USER 1 USER 2 USER 3
SHUTTER
ND FILTER
2
dial
1
MENU
STATUS
WHT.BAL
STATUS
AUTO AUTO
AUDIO
LEVEL
CH-1 CH-2
button
ON OFF
POWER
REC
AUDIO menu screen
Earphone terminal output audio
Audio output is as shown in the table below depending on
the MONITOR SELECT switch and AUDIO MONITOR
and PB AUDIO CH [DV] settings on the AUDIO menu
screen.
MONITOR
SELECT
AUDIO MONITOR
CH-1
BOTH
CH-2
62
LCD BRIGHT
CAM/VTR
- +
AUDIO SELECT TC
CH-1 CH-2 DISPLAY GENE.
AUTO TC FREE
REC
MANU UB
REGEN
CAM/VTR button
PB AUDIO CH [DV]
- L/R: CH1
MIX L/R: CH1+CH2
STEREO L: CH1 R:CH2
- L/R: CH2
* In HDV format or 1080I CAMERA mode, you can only select the settings
within the bold frame.
1.
Display the AUDIO menu screen.
Select the AUDIO item on the TOP MENU screen.
2.
Set the AUDIO menu screen.
• PB AUDIO CH [DV] Items
CH1/2
MIX
CH3/4
PB AUDIO CH [DV]
CH1/2
MIX
CH3/4
For HDV format, audio is output to CH1 and CH2 no matter
the settings.
3.
Either of the following operations returns you to the nor-
mal screen.
• Press the STATUS button
or
• Return to the TOP MENU screen, select the EXIT item
and press the SHUTTER dial.
MEMO
The DV format is capable of recording up to 4 channels
when the 12-bit, 32 kHz sampling frequency is employed.
This device records audio on the two channels CH-1 and
CH-2. (4-channel recording is possible in the case of DV
input.)
When this device is used for playback of a tape that was
recorded on another unit with audio recorded on the CH-3
and CH-4 channels, the PB AUDIO CH [DV] item on the
AUDIO menu screen must be set.
After-recording on the CH-3 and CH-4 channels is not pos-
sible.
CH1/2
L/R: CH1+CH3
L/R: CH1+CH2+CH3+CH4
L: CH1+CH3 R: CH2+CH4
L/R: CH2+CH4
: To reproduce the sound (CH-1, CH-2)
recorded during shooting.
: To reproduce the sound recorded during
shooting (CH-1, CH-2) and the after-
recorded sound (on CH-3 and CH-4)
simultaneously.
: To reproduce the sound after-recorded
on CH-3 and CH-4.
AUDIO OUT connector
CH-1
CH1
CH1+CH3
CH3
MIX
L/R: CH3
L/R: CH3+CH4
L: CH3 R: CH4
L/R: CH4
CH-2
CH2
CH2+CH4
CH4
CH3/4