Switching Between The Lcd Screen And Viewfinder Display - JVC GY-HD200U Instructions Manual

SAFETY ZONE
CENTER MARK OFF
DV-60I
4:3 Cannot be selected
DV-50I
DV-24P
DV-24PA
16:9
DV-25P
HDV-HD60P
HDV-HD50P
HDV-HD30P
HDV-HD25P [16:9]
HDV-HD24P
1080-60I
1080-50I
Switching between the LCD Screen
and Viewfinder Display
When the LCD+VF item in the LCD/VF[4/4] menu is set to
OFF, the LCD monitor and viewfinder (VF) displays are as
shown below.
LCD Monitor Status
LCD Closed Normal LCD
Inverted LCD
LCD Open Normal LCD
Inverted LCD
MEMO
• You can switch between the LCD monitor and the view-
finder by holding down the DISPLAY button for about 2
seconds.
• After you set up the function that switches the display
between the LCD monitor and the viewfinder by holding
down the DISPLAY button, the display mode is cancelled
by the LCD monitor open/close and normal/inverted
operations.
• If the LCD monitor is closed inside this device with the
screen in the normal display orientation, holding down
the DISPLAY button does not work.
When the LCD+VF item in the LCD/VF[4/4] menu is set to
ON, the LCD monitor and viewfinder (VF) displays are as
shown below.
LCD Monitor Status
LCD Closed Normal LCD
Inverted LCD
LCD Open Normal LCD
Inverted LCD
MEMO
• Press the DISPLAY button for 2 seconds to switch the
LCD screen display ON and OFF.
• The viewfinder screen is always displayed.
2.35:1CE 2.35:1CH
ON OFF
LCD Display VF Display
OFF ON
ON OFF
ON OFF
ON OFF
LCD Display VF Display
OFF ON
ON ON
ON ON
ON ON
ON
DISPLAY button
Inverted LCD
LCD open 40° or
more
Normal LCD
LCD close less
than 40°
31