Magnified Status Indications On The Lcd Monitor - JVC GY-HD110 Instructions Manual

CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor and in the Viewfinder (Cont'd)

Magnified Status Indications on the LCD Monitor

The characters on the status screens can be showed alone in magnified size on the LCD monitor.
* When this unit is being operated with an Anton Bauer battery or IDX battery, characters are displayed in magnified size.
1.
Set the LCD+VF item on the LCD/VF [3/3] menu screen to ON. (X See page 76.)
2.
When the DISPLAY button is pressed for a short time while the LCD monitor is displayed, the displayed contents change
every time the DISPLAY button is pressed. (Only when operating the GY-HD110 with the Anton-Bauer or IDX battery).
Only image displayed
Image and characters displayed
No. Item
1 Audio Lock Indicator
2 Time Code Generator Setting
Indicator
3 Drop/Non-drop Indicator
4 Indication of DR-HD100 Oper-
ation
MEMO
When characters indicating the status are displayed in magnified size on the LCD monitor, the viewfinder display the image.
26
DISPLAY button
Characters shown enlarged
Displayed during recording and playback when the audio signal is locked to the video signal.
Indicates the set status of the TC GENE switch on the side section.
FREE : TC GENE switch is set to PRESET-FREE RUN MODE.
RECR : TC GENE switch is set to PRESET-REC RUN MODE.
REGN : TC GENE switch is set to REGEN MODE.
DUPL : There is 1394 input in VTR mode and TC DUPLI. menu is set to ON.
Displayed during playback of a tape recorded in drop frame or non-drop frame mode.
DF : During playback of a tape recorded in drop frame mode.
NDF : During playback of a tape recorded in non-drop frame mode.
When a DR-HD100 (HDD unit by FOCUS enhancements) is connected, its operation status is displayed.
(For details, refer to the DR-HD100 INSTRUCTION MANUAL.)
1
2
3
Contents
4
266S DD