Others[2/2] Menu Screen - JVC GY-HD200U Instructions Manual

MENU SCREENS

OTHERS[2/2] Menu Screen

* This is not displayed in VTR mode.
Item
1394 REC TRIGGER*
BACK SPACE [HDV]*
94
Function/Setting (bold characters indicate initial settings)
Sets how to control the REC trigger command output from the IEEE1394 connector. (Can be displayed and set in
camera mode)
Set this when recording a backup of the HDV/DV signal from this device onto another device.
OFF : Does not control the backup device.
SYNCRO : Controls the backup device in conjunction with the recording start/stop mode status on this device, and
if there is no videocassette or if no tape remains for recording, controls the backup device in conjunction
with the REC trigger button and the lens VTR button on this device.
SPLIT : The REC trigger button on the right panel of this device controls the backup device recording start/stop.
Set this when you want to control the timing of the recording on this device and the backup device sep-
arately.
SERIES : Automatically starts recording on a backup device that is on Pause when the tape on this device has less
than 3 minutes remaining during shooting.
MEMO
• If you use the backup recording function on the BR-HD50, set this item to OFF.
• The cursor (K) does not move to this item when this device is recording.
This function controls the camera tape transport, back space and pre-roll time when the camera is connected to an
external HDD or external back up Recorder via IEEE1394 in HDV mode.
P-1394 : Priority for IEEE1394 recording (Auto setting)
P-TAPE : Priority for camera VCR recording
BACK SPACE [HDV]
Connected and
P-1394
No connection or
Power OFF
Connected and
P-TAPE
No connection or
Power OFF
Note 1:
REC start signal will be sent 3 seconds after pressing REC trigger button.
* Actual recording start time is depending on recorder performance.
Note 2:
REC start signal will be sent just after pressing REC trigger button.
* Actual recording start time is depending on recorder performance.
Note 3:
In this mode, the IEEE1394 stream is discontinuous during internal VCR back space editing (when the REC trigger
is operated). This may result in breaks in the recording on tape on an external recorder. In the case of HDD recording
this may result in this device staying in REC PAUSE or divided files.
MEMO
The cursor (K) does not move to this item when this device is recording.
1394 REC
IEEE1394
TRIGGER
connection
(X See page 94)
OFF
SYNCRO
Power ON
SPLIT
SERIES
OFF
SYNCRO
SPLIT
SERIES
OFF
SYNCRO
Power ON
SPLIT
SERIES
OFF
SYNCRO
SPLIT
SERIES
Internal
External Recorder or HDD
VCR
vie IEEE1394 terminal
start delay
See Note 1
approx. 3 seconds
See Note 2
approx. 1 second
See Note 3
approx. 1 second
approx. 1 second
N/A
N/A
N/A
N/A
N/A