Camera Operation Menu Screen - JVC GY-HD200U Instructions Manual

CAMERA OPERATION
Menu Screen
The CAMERA OPERATION menu screen is only displayed in the Camera mode.
Item
*1
For adjusting the image level when using auto iris, "ALC" or "EEI".
AE LEVEL
Increase value : Increases level.
Decrease value : Decreases level.
[Settings: –3, –2 - NORMAL (0) - 2, 3]
ALC MAX Sets the maximum "ALC" value to automatically change the signal intensity level depending on the brightness.
[Setting: 6 dB, 12 dB, 18 dB]
PRESET TEMP. Sets the basic color temperature when the [WHT.BAL] white balance selector switch c on page 15 is in the PRST
(PRESET) position.
3200K
5600K
MEMO
This item does not function when the FAW item on the SWITCH MODE menu screen is set to "PRESET".
*1
Smoothens the transition when the [GAIN] switch b on page 15, or [WHT.BAL] switch c on page 15 is switched
SMOOTH TRANS
over and achieves gradual change in place of sudden change.
However, the smooth transition function does not function when switching the [GAIN] switch set in ALC, FULL AUTO
ON.
OFF
ON
*1 Sets whether or not color bars are output. (This is fixed at "OFF" when in FULL AUTO mode)
BARS
OFF
ON
PAGE BACK The TOP MENU returns when the SHUTTER dial is pressed with the cursor at this position.
*1
REMOTE appears as the setting value of this item when the remote control unit is connected.
Function/Setting (bold characters indicate initial settings)
: Sets the basic color temperature to 3200K. (Use for light sources with a low color temperature,
such as halogen lamps.)
: Sets the basic color temperature to 5600K. (Use for light sources with a high color temperature,
such as sunlight.)
: Deactivates the smooth transition function.
: Activates the smooth transition function.
: Color bars are not output.
: Color bars are output.
77