See - JVC GY-HD200U Instructions Manual

HDV/DV Dubbing
(Cont'd)
When Using the GY-HD200U/GY-HD201E
as Recording Unit
(Dubbing From Another Videocassette)
1.
Set the IEEE1394 switch on left side of the GY-HD200U/
GY-HD201E.
DV : When dubbing in DV format
HDV : When dubbing in HDV format
2.
Connect the units with the IEEE1394 cable.
3.
Turn ON both units.
4.
Place the GY-HD200U/GY-HD201E in the VTR MODE.
Press the CAM/VTR button to turn on the VTR indicator.
5.
Set the frame rate.
Set the FRAME RATE item (60/30, 50/25, 24) on the
VIDEO FORMAT[1/2] menu to match the HDV/DV signal
frame rate input from the IEEE1394 connector.
X See page 74.
1.
IEEE1394 switch
CAUTION
• Set the IEEE1394 switch on both devices to either HDV
or DV.
• Start recording after making sure that both devices are
properly connected.
6.
Set the time code and user bit recording.
Set the TC DUPLI. item on the TC/UB/CLOCK menu
screen.
OFF
ON
Date and time data
66
Recording unit
2.
IEEE1394 cable
Signal flow
: Records the TC/UB set in this
device.
: Records the TC/UB for the
IEEE1394 input.
: Records the data sent from the
playback device in DV format.
Records the data of the internal
clock in HDV format.
MEMO
In HDV format, the UB set in this device is recorded regard-
less of the setting.
7.
Insert the videocassettes.
GY-HD200U/ : Insert the videocassette to be dubbed
GY-HD201E to.
Playback unit : Insert the recorded videocassette.
8.
Start playback on the playback unit.
For details, see the instructions to the unit used for play-
back.
• The playback picture from the playback unit appears
on the GY-HD200U/GY-HD201E's LCD monitor and
viewfinder screen.
9.
Press the REC/VTR trigger button on the GY-HD200U/
GY-HD201E to start recording.
To temporarily pause the recording, press the REC or
VTR trigger button.
To restart the recording, press the REC or VTR trigger
button again.
10.
When dubbing is completed.
Press the REC/VTR trigger button or the STOP button on
the GY-HD200U/GY-HD201E to stop recording, and then
stop playback on the playback unit.
MEMO
• Depending on the player, sound may not be heard
momentarily from this device when switching modes
from STILL to PLAY.
• 1080I format signal input from IEEE1394 terminal cannot
be dubbed into tape.
TC/UB
Date and Time