Dubbing With Av Devices - JVC GY-HD200U Instructions Manual

Hd camera recorder
Hide thumbs Also See for GY-HD200U:
Table of Contents

Advertisement

Dubbing with AV Devices

By connecting the video signal output terminal and the
AUDIO OUTPUT terminal on this device to an AV device,
analog signal dubbing is possible.
1.
Connect the cables.
Composite cable
or
Component cable
AUDIO
OUTPUT
connector
2.
Turn both devices on.
3.
Set this device to VTR mode.
Press the CAM/VTR button. The VTR indicator lights.
4.
Set the video output.
Set the VIDEO FORMAT menu screen. X See page 74.
VIDEO FORMAT menu screen
1 0 8 0 I
C A M E R A
• HDV PB OUTPUT item:
Set the video format to be output from the video output
terminal during tape playback.
• PB TAPE item:
Select whether to automatically detect the playback tape
video format or play back only a particular format.
Normally, use the "AUTO" setting.
64
Signal flow
Recording unit
Signal flow
O F F
5.
Set the audio output. X See page 62.
Set the AUDIO menu screen. X See page 84.
AUDIO menu screen
• PB AUDIO CH [DV] item:
Set the audio channel to be output.
6.
Insert the videocassettes.
This device
Recording unit
7.
Press the PLAY/STILL button on this device to start play-
back.
8.
Start recording on the recording unit.
For details, see the instructions to the unit used for
recording.
9.
When dubbing is completed.
Stop recording on the recording unit, and then press the
STOP button on this device to stop playback.
: Insert the recorded videocas-
sette.
: Insert the videocassette to be
dubbed to.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gy-hd200eGy-hd200chuGy-hd200cheGy-hd201eGy-hd201che

Table of Contents