Table of Contents
Advertisement
CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor
and in the Viewfinder (Cont'd)
Auto White Balance Indication
(Camera mode only)
The AUTO WHITE indication and the result of the operation are dis-
played during the auto white balance adjustment operation.
X See "White Balance Adjustment" on page 51.
Menu Setting Screen
Screen used for making various settings.
The Menu Setting Screen appears when the STATUS button is
pressed for 1 second or more.
X See "Setting Menu Screens" on page 72.
TOP MENU screen (Camera mode)
Safety Zone Indication (Camera mode only)
The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and CEN-
TER MARK item on the LCD/VF[1/4] menu screen. X See page 86.
In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO FOR-
MAT[1/2] menu screen, as shown below.
SAFETY ZONE
CENTER MARK
REC
ASPECT
DV-60I
DV-50I
4:3
DV-24P
DV-24PA
DV-25P
16:9
HDV-HD60P
HDV-HD50P
HDV-HD30P
HDV-HD25P
[16:9]
HDV-HD24P
1080-60I
1080-50I
30
OFF
4:3
-
OFF
ON
Alarm Message Display
• The following alarm messages are displayed while the STA-
TUS (0, 1, 4) screen is shown in the Camera mode, or a STA-
TUS screen is shown in the VTR mode.
If an alarm is generated while the STATUS 2, 3 screen is
shown, the STATUS 0 screen returns to display the alarm.
X See page 102.
• When an abnormality occurs in the VTR, a warning message
with an error code is displayed.
X See pages 102-104.
Alarm display area
14:9
OFF
ON
OFF
16:9
16:9+4:3
ON
OFF
Cannot be selected
ON
Hide quick links:
Advertisement
Table of Contents
