Displaying Time Code; Time Code Input Entered The Ieee1394 Connector (Gy-Hd200U/Gy-Hd201E Only) - JVC GY-HD200U Instructions Manual

Displaying Time Code

This device records SMPTE-standard (NTSC) or EBU-stan-
dard (PAL) time codes and user's bits. In the play mode or
the record mode, the reproduced time codes or user's bits
are shown on the LCD monitor or in the viewfinder.
The time codes or user's bits can be shown on the LCD mon-
itor or in the viewfinder during playback and recording as fol-
lows. (Status screen)
Setting
1.
Set the TC/UB item on the LCD/VF[3/4] menu screen to
ON.
• Time codes or user's bit data are displayed on the
STATUS screen.
Time code indication
STATUS 1 screen
2.
Whether time codes or user's bit data should be dis-
played is selected with the TC DISPLAY switch inside the
LCD door.
TC : Time codes are displayed.
UB : User's bit data is displayed.
LCD BRIGHT
- +
AUDIO SELECT
CH-2
CH-1
AUTO
MANU
TC DISPLAY switch TC GENE. switch
(Example)
Time code indication
00:00:00:00
User's bits indication
FF EE DD 20
CAM/VTR
TC
DISPLAY GENE.
TC FREE
REC
UB
REGEN
Time code input entered the
IEEE1394 connector (GY-HD200U/
GY-HD201E only)
Pressing the STOP button for 1 second in the EJECT or stop
mode displays the DV input time code data or user's bit data
from the IEEE1394 connector on the STATUS screen.
DTCG : The time code data from the IEEE1394 connector
DUBG : The user's bit data from the IEEE1394 connector
To return to display of the original time code or user's bit,
press the STOP button. (Display of the normal time code or
user's bit is also restored by performing VTR operation.)
MEMO
• To record HDV/DV input time code and user's bit from
the IEEE1394 connector, set the TC DUPLI. item on the
TC/UB/CLOCK menu screen to ON.
X See page 90.
• To maintain the continuity of time code data, use with the
TC GENE. switch set to REGEN mode when recording
HDV/DV input signal from the IEEE1394 connector.
• There is no time code display for HDV input.
CAUTION
A time code with a duration of more than 2 hours may not
be displayed correctly by DV components for general con-
sumer use, as some of these lack the capability to display
longer time codes.
43