Magnified Status Indications On The Lcd Monitor; Synchronized Display With An External Time Code Generator; Voltage Indication - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 29 Tuesday, October 24, 2006 3:11 PM
No. Item
8 Time/Date indication
9

Voltage indication

0 Audio Lock indication
Magnified Status Indications on the
LCD Monitor
The characters on the status screens can be showed alone
in magnified size on the LCD monitor.
1.
Set the LCD+VF item on the LCD/VF[4/4] menu screen to ON. X See page 92.
2.
When the DISPLAY button is briefly pressed while the LCD monitor is displayed, the displayed contents change every time the
DISPLAY button is pressed.
Only image displayed
Image and characters displayed
No. Item
1 Audio Lock Indicator
2 Time Code Generator Setting
Indicator
3 Drop/Non-drop Indicator
4 Synchronized display with an
external time code generator
5 Indication of DR-HD100 Oper-
ation
MEMO
When characters indicating the status are displayed in
magnified size on the LCD monitor, the viewfinder display
the image.
Recorded data are displayed during playback, fast forward, and rewind.
During recording in DV format, the data from the IEEE1394 connector is displayed.
During recording in HDV format, the data of internal clock is displayed.
Whether or not the date and time should be displayed and the display style are set on the TIME/DATE
menu screen. X See page 95.
When the date and time have not been set, the following indication appears.
- -/- -/- - - -: - -: - -
(Example) 12.2V : Indicates remaining battery level in 0.1V steps.
Battery voltage and remaining battery are displayed. Select the display method in BATTERY INFO. on the
LCD/VF[1/2] menu screen X See page 91.
Anton Bauer battery: Voltage/remaining capacity (%)/remaining time
IDX Endura battery : Voltage/remaining capacity (%)
Displayed when the audio signal from DV recording or playback is locked to the video signal.
DISPLAY button
Characters shown enlarged
Displayed during recording and playback when the audio signal is locked to the video signal.
Indicates the set status of the TC GENE switch on the side section.
FREE : TC GENE switch is set to PRESET-FREE RUN MODE.
RECR : TC GENE switch is set to PRESET-REC RUN MODE.
REGN : TC GENE switch is set to REGEN MODE.
DUPL : There is 1394 input in VTR mode and TC DUPLI. menu is set to ON.
EXT : Displays when time code is input to the TC IN terminal.
(When TCG SOURCE on the TC/UB/CLOCK menu screen is set to EXTERNAL.)
Indicates the framing mode of the time code.
DF : Drop frame mode
NDF : Non-drop frame mode
Lights up when the time code generator of this device synchronizes with the time code input from the TC
IN terminal. Blinks when synchronization is unsuccessful. Turns off If there is no input signal.
When a DR-HD100 (HDD unit by FOCUS enhancements) is connected, its operation status is displayed.
(For details, refer to the DR-HD100 INSTRUCTION MANUAL.)
Contents
1
2
3
Contents
4
266S DD 5
29