Wall Mounting Kit For Scan 58 With High Top - SCAN 58 - series Assembly And Instruction Manual

24

Wall mounting kit for Scan 58 with high top

If you choose to connect the stove with an elbow pipe or a rear out-
let, the stove must be mounted to the wall behind the oven using a
special wall mounting kit. This kit can be purchased from your local
Scan dealer
See page 21 for how to fit the high top.
Fit the wall mounting kit before connecting the stove to the chimney.
It is important that the stove is mounted securely to the wall
using the right fixings for the specific type of wall.
Pointed screw M4x5
A C C E S S O R I E S
Casing for wire bushing
Fix to the wall using the
right fixings for the speci-
fic type of wall.
Safety wire
Wire bushing
Nipple screw Ø8x12.5
Scan 58 high top with elbow pipe
N:
Casing for wire bushing is fixed to the wall
Fasten the safety wire and the wire bushing to the wire bushing
casing using a pointed screw.
N
N