System Requirements; Hardware And Software Requirements - HP proCurve User Manual

System Requirements

Hardware
Note: Dual-homed or multi-homed PCs are not supported.
DHCP clients are supported. The IP address of the management station cannot be static or dynamic DHCP.
Software

Hardware and Software Requirements

HP TopTools for Hubs & Switches runs on Windows NT and Windows 2000.
The system requirements are listed in the following table.
Table 3-1. System Requirements
Item
Computer System
Minimum RAM
Free Disk Space
Paging File Size
Disk Drive
Video Monitor and Interface
Card
LAN Adapter
Other
Supported Management
Platforms
Browsers
Operating System
Web Server
Requirements
IBM PC-compatible computer, 266 MHz processor; 400
MHz recommended
128 Mbytes; 192 Mbytes recommended
175 Mbytes
Note: At least 400 MB is needed to install all the required
Microsoft components on a computer that has only the
Windows NT operating system installed.
150 MB
CD-ROM drive
Super VGA (16-bit color display) video monitor and
interface card
Any LAN adapter card supported by the system
A mouse or other pointing device that is supported by the
system
TopTools
HP OpenView Network Node Manager
Microsoft Internet Explorer (MSIE) 5.0 with Task
Scheduler, supplied on the TopTools CD-ROM
Microsoft Windows NT version 4.0 with Service Pack 6a
(workstation or server)
Windows NT 4.0 Options Pack from Microsoft
3