Rebooting A Device - HP proCurve User Manual

Performing Diagnostics

Rebooting a Device

15-2
Figure 15-1. Ping/Link Test Page
The number of successes or failures of the test packets reaching the Destina-
tion IP or MAC Address are displayed at the top of the page. A failure means
that either the device at the destination address did not respond within the
timeout specified, or the data returned from the device indicated an error.
The Defaults button will reset the Number of Packets to Send and the Timeout
value to the default values of 10 packets and 1 second, respectively.
Rebooting a Device
Some devices have a Device Reboot... button. Rebooting a device is the same
as powering off. Network operation may be interrupted.