Introduction; Models Covered; Main Features - Centurion D3 User Manual

Introduction

This guide highlights the features and operation of CENTURION SLIDING GATE
OPERATORS to ensure that YOU, the user, get the most from your system. Basic
maintenance is also described, but in the event of product malfunction, you are
advised to contact your installer, or your local Centurion branch (refer to back page).

Models Covered

CENTURION D3
CENTURION D5
CENTURION A10
FAAC 844 (with Centurion CP81 controller)

Main Features

D3, D5
A key feature of these products is the chassis/gearbox which is moulded from a high
tech engineering polymer. The user benefits from this material in terms of its aesthe-
tics, and corrosion free properties. Due to the self locking action of the internal
gearset, the unit is resistant to forced entry.
An optional theft resistant cage is available to give additional peace of mind.
A revolutionary aspect of the CENTURION range of operators is the limit switch
mechanism. Mounted internally, and therefore tamper proof, the limit switch monitors
the speed and location of the gate, ensuring reliable and safe anti-crushing protec-
tion and accurate position control.
Precise control of the gate stopping position is achieved by a high resolution encoder
wheel and opto-electronic sensor built into the unit.
The electronic controller has many advanced features including variable sensitivity
collision detection, adjustable delay autoclose, pedestrian opening, etc. Advanced
lightning protection is built into the controller as standard. On D3/D5 domestic
Centurion Sliding Gate Operators User Guide - 7