Change Station Number (Relocate) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Program/Service
>
*
9419=Relocate?
qmhem
Complete relocate
rmhem

Change station number (Relocate)

Only for U
sonnel).
For HFA connections, see
You can put your station number on every other avail-
able telephone when it is set up (ask the service per-
sonnel).
Your previous telephone then receives the old station
number of your new telephone. The station number to-
gether with the settings (for example, programmed
keys) of the telephone are changed.
Precondition: Your old and new telephone are the first
telephones at each connection. The telephones are idle.
The following procedure is carried out on the new tele-
phone.
Press the key. The LED lights up.
:
Select and confirm.
or
Enter the code.
o
Enter your own station number.
o
Enter the telephone lock PIN
(This is not necessary if you have not determined a code
yet).
:
Confirm.
or
Enter the code.
If you exchange station numbers from different
system telephones, all programmed keys are re-
placed with the default assignment.
You can, however, connect your telephone to an-
other connection and carry out the procedure.
Using Other Functions
connections (ask the service per-
P0/E
page 65.
page 86.
87