Using Call Forwarding No Reply (Cfnr) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Program/Service
>
More features?
>
CFNR on?
qhmi
US: Save entry?
UK: Save?
>
CFNR off
rhmi
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
If you are a call forwarding destination, your dis-
play will show the station number or the name of
the originator on the upper line and that of the
caller on the lower line.

Using Call Forwarding No Reply (CFNR)

Calls that are not answered after three rings (=default,
can be adjusted by service personnel) or that are re-
ceived while another call is ongoing can be automatical-
ly forwarded to a specified telephone.
Press the key. The LED lights up.
:
Select and confirm.
:
Select and confirm.
or
Enter the code.
o
Enter the destination number.
• Enter the internal station number for internal desti-
nations.
• Enter the external code and the external station
number for external destinations.
:
Confirm.
:
Deactivating Call Forwarding No Reply
:
Select and confirm.
or
Enter the code.
If CFNR is enabled, the following briefly appears
on the display when you replace the handset:
"US: CFNR to: <x>",
UK: "CFNR TO: <x>".
Call Forwarding
77