Change Call Number (Relocate) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Program/Service
>
*
9419=Relocate?schen?
qmhem
Complete Relocate
rmhem

Change call number (relocate)

You can put your call number on every other available
telephone when it is set up (ask your service person-
nel).
Your previous telephone then receives the old call num-
ber of your new telephone. The call number together
with the settings (e.g. programmed keys) of the tele-
phone are changed.
Precondition: Your old and new telephone are the first
telephones at each connection. The telephone are in
idle state.
The following procedure is carried out on the new tele-
phone.
Press the key. The LED lights up.
:
Select and confirm.
or
Enter the code.
o
Enter your own call number.
o
Enter code (telephone lock)
(This is not necessary if you have not determined a code
yet).
:
Confirm.
or
Enter the code.
If you exchange call numbers from different sys-
tem telephones, all programmed keys are re-
placed with the default assignment.
You can, however, connect your telephone to an-
other connection and carry out the procedure.
Using Other Functions
Page 79.
85